All Collections
Tracker Models
Asset 432
How to Replace the Battery of Asset 432 Tracker
How to Replace the Battery of Asset 432 Tracker

Master the simple battery replacement process for your Asset 432 GPS tracker.

Mitch Logistimatics avatar
Written by Mitch Logistimatics
Updated over a week ago

This guide provides a detailed, step-by-step process on how to replace the battery in your Asset 432 GPS tracker. Designed for easy understanding, we'll turn what may seem like a complex task into a smooth and straight-forward process. You've got this!


Tools You'll Need

Before starting, gather the following tools:

  • Phillips screwdrivers (#2 and either #0 or #00)

  • Flat prying tool

  • Pointed tool (such as a small sharp screwdriver)


๐Ÿ’กTip

For a visual step-by-step walkthrough, you can watch this video guide on how to replace the battery of your Asset 432.


Steps for Battery Replacement

  1. Access the Device Interior

    • Turn the Asset 432 upside down to reveal the four waterproof plugs.

    • Carefully remove these plugs using the pointed tool.

    • Unscrew the four screws beneath the plugs with a Phillips #2 screwdriver.
      โ€‹

  2. Open the Device

    • Find the tab on the bottom right of the device's casing.

    • Use the flat prying tool to gently lift the tab and separate the front plate, exposing the interior and printed circuit board (PCB).
      โ€‹

  3. Power Off the Device

    • Switch the device off by flipping the on/off switch inside.
      โ€‹

  4. Remove the PCB

    • Unscrew the four screws holding the printed circuit board (PCB) in place with a Phillips #0 or #00 screwdriver.

    • Carefully lift the PCB out, taking care not to damage the connected wires.
      โ€‹

  5. Remove the Battery

    • Detach the battery from the board.

    • If stuck with adhesive, gently pry the battery off.
      โ€‹

  6. Install the New Battery

    • Place the new battery in the same location, pressing into the adhesive.

    • Reattach the battery wires to the PCB securely.

    • Re-screw the PCB into place and ensure the device is sealed with the screws and waterproof plugs.
      โ€‹

  7. Reset the Battery Percentage

    • Log into your tracking platform and issue the "Reset Battery Indicator to 100%" command.

    • Allow up to 24 hours for the reset to take effect.

    • Keep the device powered on and in an area with strong signal reception.


What's Next?

Need more help? Get support from our team by contacting us through our Support Center at https://logistimatics.com/contact/.

You can also email us at hello@logistimatics.com.

Our dedicated support team is available to assist you from Monday to Friday, 9 AM to 5 PM Eastern Time.


Did this answer your question?