Skip to main content
All CollectionsTroubleshooting
How to Replace or Reseat the SIM Card in Your Car Charger Tracker
How to Replace or Reseat the SIM Card in Your Car Charger Tracker

Experiencing audio or tracking issues with your Car Charger tracker? Replace or reseat the SIM card - a common fix for such problems.

Dane avatar
Written by Dane
Updated over a week ago

Are you running into audio or tracking hiccups with your Car Charger tracker? Don't worry, you're not alone, and there's a straightforward solution that often does the trick. This article is your step-by-step companion for reseating or replacing the SIM card in your device. Whether it's erratic tracking data or audio quality concerns, a quick SIM card adjustment could be all you need to get things back on track. Let's dive into how you can easily tackle this fix and ensure your Car Charger tracker is performing at its best.


Understanding Replacement vs. Reseating

  • Replacing: Done when you have a new SIM card due to activation or connectivity issues.

  • Reseating: Performed as a troubleshooting step when advised by Customer Support for connectivity issues.

Materials Needed

  • Your Car Charger tracker

  • A flat-head screwdriver, key, tweezers, or a similar tool

  • A new SIM card (if you're replacing the SIM Card)


Step-by-Step Instructions

  1. Access the SIM Slot. Locate the small opening above the USB charging ports on the tracker. Use the flat-head screwdriver or a key to gently pry open the cover.

  2. Open the SIM Card Door. With the USB ports facing down, locate the metal cover on the right side that secures the white SIM card. Slide the metal cover down towards the USB ports to open the door and allow the SIM card to pop out.

  3. Replace or Reseat the SIM Card

    • For Reseating: Carefully place the original SIM card back into its slot.

    • For Replacing: Take out the old SIM card and insert the new one, ensuring the numbers face you and the metal contacts face the charger. The notched corner should be at the top left.

  4. Secure the SIM Card. Close the metal cover over the SIM card and slide it up away from the USB ports. The cover should be secure enough that the SIM card won't fall out even if the charger is turned upside down.

  5. Reassemble the Tracker. Snap the cover back on, pressing firmly to ensure it's properly sealed.

  6. Power Up. Plug your Car Charger tracker into your vehicle and switch on the ignition to provide power.


💡Tip

Experiencing tracking issues? Simply reseat or replace your Car Charger tracker's SIM card using a flat-head screwdriver. Ensure the SIM is correctly positioned and securely closed before powering up. Quick fix for common connectivity problems!


Did this answer your question?