Skip to main content
All CollectionsTroubleshooting
How to Charge Your Mobile 200 Tracker
How to Charge Your Mobile 200 Tracker

Learn how to effectively charge your Mobile 200 tracker with practical tips and guidance.

Dane avatar
Written by Dane
Updated over a week ago

Welcome aboard! Get ready to master the art of charging your Mobile 200 tracker to keep it powered up and prepared for action. This guide will walk you through the best charging practices to maximize your tracker's lifespan and performance.


Step-by-Step Instructions

  1. Plug your Mobile 200 tracker into the charger and connect it to a power source. You'll know it's charging when you see a solid red light.

  2. If the red light starts blinking, press and hold the middle button for 15-20 seconds. Watch for the lights to flash red, blue, and green in sequence.

  3. Place your tracker where it has a clear view of the sky, like outdoors or near a window, for the best GPS signal.

  4. Double-tap the center button to connect. The blinking LED lights indicate it's trying to connect, and then they'll turn off once it has.

  5. Leave the tracker still for 20 minutes, giving it time to update and recalibrate its GPS settings.

  6. Open the Logistimatics app or web interface, log into your account, and check the map to see if your tracker is showing up and ready to go.


Troubleshooting Tips

  • If the red LED light doesn't turn on within 30 minutes, inspect the charging port for debris.

  • Clean the charging nodes and port with a cotton cloth slightly dampened with alcohol.

  • Try a different charging brick or outlet to eliminate potential power issues.

  • If needed, a replacement charger can be obtained here.


💡Tip

For efficient charging, keep your Mobile 200 tracker dry, ensure a clear sky view for GPS accuracy, and regularly clean its charging port. This ensures readiness and reliability.


Did this answer your question?