Welcome to the Road Wired GPS tracker getting started guide! This tracker is a reliable, cost-effective solution for tracking vehicles and assets. In this article, we will walk you through the process of setting up your Road Wired, including downloading the app, tracking, and troubleshooting common issues.
Unboxing Your Road Wired
Inside the Road Wired box, you will find:
Road Wired GPS tracker
Wiring with a modular connector
SIM Card (installed in tracker)
Getting started guide
To get started with your tracker, follow these simple steps:
Before installing your Road Wired, consider the optimal location to wire the tracker into your vehicle or equipment. You must have access to a power source. Typical vehicle placement is underneath the dashboard, under a seat or in the glove box. Avoid under the hood or in the trunk.
The road wired comes with a wiring harness, the black wire is the ground, and this can be connected to the negative terminal of the battery. The red wire is 12v constant power, this can be connected directly to the battery. The yellow and orange wires can be ignored.
Note: If you are uneasy about the installation process, we suggest entrusting the task to a mechanic.
Here are some helpful downloadable links:
Download the App
Download the Logistimatics App (use the links below to navigate and download).
Open the app and log in using the email and password you entered during checkout.
Using the Logistimatics App
After logging in to the Logistimatics App, follow these simple steps to view your tracker:
If your tracking page shows "No Data," don't worry. This is normal and indicates that your device hasn't reported its location yet. To resolve this, take the following action:
Go for a short drive.
Wait for the tracker to update its location, which should happen shortly.
Once the tracker reports its location, the tracking page will display information like this:
Congratulations! Your Road Wired tracker is now online and ready to use.
To help you read the tracking map more effectively, watch our introductory video, which covers the following key aspects:
Dots and their colors: Representing different tracker locations and statuses
Stops: Indicating where the tracker has stopped for a certain period
Satellite view: Offering a detailed view of the tracker's surroundings
Date range: Allowing you to filter location data by specific dates
Battery Life and Reporting Modes
The Road Wired tracker is getting its power directly from the vehicle’s battery and the back-up battery will drain completely when removed from power for 24 hrs.
This tracker reports its location every 400m when moving by default but can be changed to report every 30 seconds while moving and 1 hour while stationary.
Reporting modes and other commands:
Report every 400m when moving(Default)
Reports position every 400m when moving.
LEDs sleep after 5 minutes(Default)
LEDs stop flashing after 5 minutes of activity.
LEDs always on
LEDs are always on.
Report every 30 seconds when moving, 1hr stationary
Reports every 30 seconds while moving and every 1 hour while stationary.
To set your tracker’s reporting mode or command, follow these steps within the Logistimatics App:
Tap on "Commands" in the app.
Select the desired reporting mode or command from the list.
Send the command and wait for the device to confirm the change.
You're now fully equipped to make the most of your Road Wired tracker! We hope this guide has provided you with a clear understanding of the unboxing process, device activation, and essential features of our platform.
As you begin using your tracker, remember that our dedicated support team is always here to help. If you have any questions or need assistance, please visit our Support Center at https://logistimatics.com/contact/ or contact us at firstname.lastname@example.org.
You can also find helpful video tutorials and FAQs on our website to further enhance your experience. Thank you for choosing Logistimatics, and we wish you a seamless tracking experience!